Product Description
Product Description
Drive pulley
The driving drum is the main component of transmitting power.
Dt-ii drive drum according to the load capacity is divided into light, medium and heavy 3 types, drum diameter of 500, 630, 800, 1000mm. with
A roller has several different shaft diameters and center spans for selection.
1) Light: bearing aperture is 80 ~ 100mm, shaft and wheel hub are single key connection, drum is a single plate welded structure, one-way shaft.
2) Medium: bearing aperture is 120 ~ 180mm, shaft and hub are single key connection, there are 2 kinds of one-way and two-way exit shaft
3) Heavy duty: bearing aperture is 200 ~ 220mm, expansion sleeve connection is cast welding cylinder structure.
The surface of the roller is covered with smooth steel, herringbone and CHINAMFG pattern rubber. Herringbone pattern rubber surface friction number, good drainage, but directional,
When installing the herringbone tip should be consistent with the conveyor belt running direction. The conveyor running in both directions should use a CHINAMFG pattern. For important occasions, be sure to Coated with vulcanized rubber; For flame-retardant, flameproof occasions should be used corresponding explosion-proof. Bearing seats are all lubricated with oil cup grease.
Bend pulley
It is used to change the running direction of the conveyor belt or increase the wrapping Angle of the conveyor belt on the transmission drum, and its structural form is divided into light, medium and heavy
Three types, the shaft of the grade diameter of 50 ~ 100mm,120 ~ 180mm and 200 ~ 260mm, the surface of the drum has bare light
Steel surface and smooth rubber surface two.
Drive device: by motor, reducer, high speed shaft coupling or hydraulic coupling, brake, low speed shaft coupling and backstop composed of drive single
The yuan is fixed on the drive frame, and the drive frame is fixed on the foundation.
Detailed Photos
Product Parameters
Certifications
Packaging & Shipping
Installation Instructions
Drive pulley and Bend pulley
(1) The roller should check the grease in the bearing seat before installation to ensure that the bearing is filled with lithium grease and the bearing seat is filled with grease
The amount 2/3 of the empty fat volume.
(2) When the transmission drum is a chevron groove surface, pay attention to the direction of the groove should be consistent with the running direction of the conveyor belt to prevent transmission
The conveyor runs off, and is conducive to trench drainage and sewage.
(3) Necessary protective measures shall be taken in the hoisting process, and the rubber surface of the roller shall not be damaged.
(4) During installation, the roller can be adjusted by adding gaskets under the cylinder bearing seat and adjusting screws on the frame
The cylinder position ensures that the axis and center first conform to the formula range listed in Table 14.
Company Profile
HangZhou CHINAMFG Intelligent Conveying System Co.,Ltd (abbreviated as CHINAMFG Intelligent) is the High-end Conveying Equipment brand , with excellent technical team and in house intellectual property & national patents,developing intelligent conveying machinery. Focusing on transforming itself into international competitive one-station solution provider of intelligent conveying system, providing not only intelligent products but also whole cycle management from construction to operation & service for our customers.Our company located in HangZhou city in North China Plain, it’s the cross road of ZheJiang ,ZheJiang and ZheJiang . We have more than 800 units advanced manufacturing equipments, including 20 large and main units and 3 automatic production lines. The factory covers 253,000 square meters. It’s registered capital is 71,550,00 USD, There are more than 300 employees which contains 30 with middle-level titles and 125 technical workers with high technical skills. Xinriseng is mainly engaged in the manufacture, sales and technical services of belt conveyors, large angle belt conveyors, horizontal curved belt conveyors and long distance crossing conveyors. Our products can be used in metallurgy, building materials, electric power, coal, port and other industries, products have been covered the whole domestic market, and exported to the United States, Germany, France and other EU countries, Australia, Brazil, along the Belt and Road countries, Southeast Asian countries and African emerging markets, totally more than 50 countries, gained the customers’ praise.Our company has a number of provincial innovative platforms, relying on the technological radiation, constantly strengthens exchanges and cooperation with scientific research institutes. We have successively formed school-enterprise partnerships with China University of Mining, ZheJiang University, ZheJiang Materials Handling Research Institute, HangZhou University of Architecture and Technology, keeping the conveyor design at the leading level in China. At the same time, our technical team regularly carries out technical exchanges and discussions with foreign companies, learning international leading design concepts and process methods, and keeps pace with international new technologies.With the innovative technology, good quality, CHINAMFG has established a one-stop service system. We will continue adhering to “servingthe users, making contributions to society”, make our company a flagship of conveying industry with international competitiveness. All in all, our company will provide the best products with high quality and competitive price for our customers and share success with you together.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Certification: | CE, ISO |
|---|---|
| Pulley Sizes: | Type F |
| Manufacturing Process: | Casting |
| Material: | Carbon Steel |
| Surface Treatment: | Polishing |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
| Customization: |
Available
| Customized Request |
|---|
Can grooved pulleys be used in DIY projects and home improvement tasks?
Yes, grooved pulleys can be used in DIY (do-it-yourself) projects and home improvement tasks to enhance functionality, create mechanical systems, or improve efficiency. Here are some examples of how grooved pulleys can be utilized in DIY and home improvement applications:
1. Mechanical Systems:
– DIY Conveyor Belt: Grooved pulleys can be used to create a small-scale conveyor belt system for moving objects or materials within a DIY workshop or project. By attaching grooved pulleys to a frame and threading a compatible belt, you can easily transport items from one location to another.
– Garage Door Opener: Grooved pulleys can be employed in DIY garage door opener systems. By integrating grooved pulleys with a motorized mechanism and a timing belt, you can create a simple and efficient way to open and close your garage door.
2. Mechanical Advantage:
– DIY Block and Tackle System: Grooved pulleys can be utilized in a block and tackle system to create a mechanical advantage for lifting heavy objects. By arranging multiple grooved pulleys and a rope or cable, you can reduce the amount of force required to lift or lower objects, making it easier to handle loads in DIY projects or home renovations.
3. Home Appliances:
– DIY Clothesline: Grooved pulleys can be incorporated into a DIY clothesline system. By installing grooved pulleys at appropriate locations and using a durable rope or line, you can create a convenient method for hanging and drying clothes outdoors.
– Window Blinds or Curtains: Grooved pulleys can be employed in DIY window blinds or curtain systems. By attaching grooved pulleys to the window frame and threading a cord or chain, you can create a mechanism to easily raise or lower blinds or curtains, providing privacy and light control.
4. Exercise Equipment:
– DIY Pulley System for Strength Training: Grooved pulleys can be used in DIY pulley systems for strength training or rehabilitation exercises. By mounting grooved pulleys to a sturdy frame and using cables or ropes with handles, you can create a versatile and adjustable resistance training system at home.
5. Art Installations:
– Kinetic Sculptures: Grooved pulleys can be incorporated into DIY kinetic sculptures or interactive installations. By utilizing grooved pulleys with various diameters and attaching them to movable components, you can create visually appealing and dynamic artworks that respond to external forces or user interaction.
When using grooved pulleys in DIY projects and home improvement tasks, it is essential to ensure proper installation, alignment, and tension of the belts or ropes. Additionally, always prioritize safety by following best practices, using appropriate materials, and considering weight limits and load-bearing capacities.
By leveraging grooved pulleys in DIY projects and home improvement tasks, you can add functionality, mechanical advantage, and efficiency to your creations and make your home projects more enjoyable and rewarding.
What safety considerations should be kept in mind when using grooved pulleys?
When using grooved pulleys, it is important to prioritize safety to prevent accidents and ensure the well-being of operators and maintenance personnel. Here are some key safety considerations to keep in mind:
1. Proper Guarding:
Ensure that grooved pulleys are adequately guarded to prevent accidental contact with moving parts. Guards should be in place to cover the pulley and belt area, minimizing the risk of entanglement or injury. The guards should be designed to allow for necessary maintenance and inspection without compromising safety.
2. Lockout/Tagout Procedures:
Follow lockout/tagout procedures when performing maintenance or repair activities on systems involving grooved pulleys. Lockout/tagout procedures involve isolating the power source, locking or tagging the energy isolation devices, and ensuring that the equipment cannot be energized accidentally. This helps prevent unexpected startup or release of stored energy, protecting personnel from potential hazards.
3. Personal Protective Equipment (PPE):
Wear appropriate personal protective equipment, such as safety glasses, gloves, and protective clothing, when working with grooved pulleys. PPE helps protect against potential hazards, such as flying debris, rotating parts, or chemical exposure. The specific PPE requirements may vary depending on the work environment and the associated risks.
4. Training and Education:
Provide comprehensive training and education to operators and maintenance personnel regarding the safe operation and maintenance of systems with grooved pulleys. Training should cover topics such as proper operation, emergency procedures, hazard identification, and safe maintenance practices. Well-informed personnel are better equipped to recognize and mitigate potential risks.
5. Regular Maintenance and Inspection:
Implement a regular maintenance and inspection schedule for grooved pulleys to ensure their proper functioning and identify any potential safety issues. Inspect the pulleys, belts, guards, and associated components for signs of wear, damage, or misalignment. Replace worn or damaged parts promptly to maintain the safety and reliability of the system.
6. Load and Speed Limitations:
Adhere to load and speed limitations specified by the manufacturer for grooved pulleys. Exceeding these limitations can lead to excessive stress on the pulley and belt, increasing the risk of failure or accidents. Consult the equipment documentation or manufacturer’s guidelines to determine the appropriate load and speed limits for safe operation.
7. Proper Belt Tensioning:
Ensure proper belt tensioning to prevent belt slippage and maintain the integrity of the power transmission system. Improper tensioning can lead to reduced grip, increased wear on the belt and pulley, and potential belt dislodgement. Follow the manufacturer’s recommendations or industry best practices for belt tensioning to ensure safe and efficient operation.
8. Risk Assessment:
Conduct a risk assessment of the entire system involving grooved pulleys to identify potential hazards and implement appropriate control measures. Consider factors such as pinch points, potential for entanglement, exposure to rotating parts, and other relevant risks. Mitigate identified risks through engineering controls, administrative controls, or the use of additional safety devices.
9. Emergency Stop Devices:
Install emergency stop devices, such as pull cords or emergency stop buttons, in convenient and accessible locations near the grooved pulley system. These devices allow for immediate shutdown of the system in case of emergencies or hazardous situations. Ensure that all personnel are familiar with the location and operation of these emergency stop devices.
10. Compliance with Regulations:
Ensure compliance with applicable safety regulations, standards, and codes when utilizing grooved pulleys. Familiarize yourself with relevant regulations, such as those issued by occupational safety and health authorities or industry-specific guidelines. Compliance with these regulations helps maintain a safe working environment and minimizes the risk of accidents.
In summary, maintaining safety when using grooved pulleys involves proper guarding, adherence to lockout/tagout procedures, use of personal protective equipment, comprehensive training, regular maintenance and inspection, adherence to load and speed limitations, proper belt tensioning, risk assessment, installation of emergency stop devices, and compliance with safety regulations. By following these safety considerations, the risks associated with grooved pulleys can be minimized, ensuring a safe working environment for all personnel involved.
What types of belts or cables are typically employed with grooved pulleys?
Grooved pulleys, also known as V-groove pulleys, are commonly used in conjunction with specific types of belts or cables. Here’s a detailed explanation of the typical belts or cables employed with grooved pulleys:
1. V-belts:
V-belts are one of the most commonly employed types of belts used with grooved pulleys. These belts have a trapezoidal cross-section that matches the V-shaped grooves in the pulleys. V-belts are made of rubber or synthetic materials and are flexible, allowing them to fit into the grooves of the pulleys. They provide reliable power transmission and are widely used in various applications, including automotive engines, industrial machinery, HVAC systems, and more.
2. V-Ribbed Belts:
V-ribbed belts, also known as serpentine belts or multi-rib belts, are another type of belt commonly used with grooved pulleys. These belts have a flat or slightly curved cross-section with ribs running along their length. The grooved pulleys for V-ribbed belts have multiple grooves, matching the ribs on the belt. V-ribbed belts are often used in applications where high power transmission is required, such as automotive engine systems, industrial machinery, and HVAC systems.
3. Timing Belts:
Timing belts, also called toothed belts or synchronous belts, are used in applications that require precise synchronization of the pulleys. These belts have teeth or notches on the inner surface that mesh with corresponding grooves on the pulleys. Timing belts are commonly employed in engines, camshaft drives, conveyor systems, and other applications where accurate timing and synchronization are crucial for proper operation.
4. Flat Belts:
While grooved pulleys are primarily designed for V-belts or V-ribbed belts, they can also be used with flat belts in certain applications. Flat belts have a rectangular cross-section and do not have grooves or teeth. However, grooved pulleys can still be used with flat belts by providing a flat contact surface. Flat belts are used in various applications, including power transmission, conveyor systems, and light-duty machinery.
5. Wire Rope or Cable:
In certain specialized applications, grooved pulleys can be employed with wire rope or cable. The grooves in these pulleys are designed to accommodate the specific diameter and shape of the wire rope or cable, providing a secure grip. This configuration is commonly used in lifting and hoisting systems, cranes, winches, and other applications where wire rope or cable is used to transmit force or lift heavy loads.
It is important to note that the selection of the appropriate belt or cable for use with grooved pulleys depends on the specific requirements of the application, including power transmission capacity, load, speed, and environmental conditions. Manufacturers and suppliers of grooved pulleys typically provide compatibility information and guidelines regarding the suitable types and sizes of belts or cables to be used with their pulleys.
In summary, the typical belts or cables employed with grooved pulleys include V-belts, V-ribbed belts, timing belts, flat belts, and wire rope or cable. The choice of the belt or cable depends on the specific application and the requirements of the power transmission system.
editor by CX
2024-01-18